全国服务热线:15397675238

您的位置: 首页 > Fire air compressor

HC-W400Z Fire Respirator Inflation Pump

HC-W400Z fire breathing apparatus inflation pump is equipped at the gas supply station of each fire brigade or various fire fighting vehicles. During the fire scene or rescue and relief process, it provides emergency gas supply at the scene, so that the majority of fire fighters can breathe highly purified, clean, tasteless, safe and reliable compressed air under various environments such as thick smoke, toxic gas, steam or oxygen deficiency, thus ensuring that fire fighters can safely and effectively carry out fire fighting, rescue, and rescue.

在线咨询 全国热线
15397675238
产品介绍


一、 Product name

HC-W400Z Breather Charging Pump (High Pressure Air Compressor)

二、Product pictures
hc-w400-11.jpg
三、main parameter

L Model: HC-W400Z (microcomputer system)

L Working pressure: 30Mpa Mpa (300bar)

L Displacement (suction state): 400L/min L/min

L Type: W-type layout - three cylinder three-stage compression to resurrection plug

L Drive: electric 380V/50Hz/7.5kw

L Lubrication method: splash lubrication (food grade lubricating oil 750-H2)

L Cooling mode: air cooling

L Control mode: automatic startup and shutdown, automatic sewage discharge, temperature control system, phase sequence protection function, emergency stop function, low noise, low temperature, low speed, microcomputer setting

L Clean air: primary air filtration, secondary oil-water separation, secondary classified air purification

L Safety device: interstage safety valve, pressure maintaining valve, automatic shutdown system, box type protective cover

L Package size (length × wide × High): 76 × one hundred and ten × 140cm

L Weight: 290kg

L Inflation speed: 6L bottle, 30Mpa, about 5.5 minutes

L Relevant certification: CE certification, MA test report, air quality test report

L Packing list: instructions, safety inspection report certificate, 2 sets of inflation hoses and connectors, and food grade lubrication is built into the machine.



四、working principle

hc-w400-9.jpg

This product is produced in batches after the design change and optimization of the Italian model. The final piston adopts special process, the piston ring adopts Japanese Riken process, and all the casting products are cast in a large-scale factory with outsourcing expertise. The product has been on the market for more than ten years and has received unanimous good comments from users. This product adopts three cylinder three-stage compression, splash lubrication, interstage safety valve and filtering system. HC-W400 can provide safe compressed air for any industry that needs high pressure and pure air source, and can also provide safe compressed air that meets the requirements of human respiration. This product is designed, produced, commissioned and accepted according to the requirements of Marine High Pressure Piston Air Compressor (GB/T 12929-2008); The air quality conforms to EN12021 international breathing standard for breathing compressors; HC-W400 is an air compressor, which compresses 1kg (1bar/0.1Mpa) of air in free state to a high pressure gas with a gauge pressure of 300kg (300bar/30Mpa) step by step. After passing through the separator and filter in the unit, the air removes the oil and impurities contained in the high pressure air, and filters the fine particulate matter (PM2.5) contained in the inhaled air to a safety value of less than 10 micrograms, Comply with the standards formulated by the World Health Organization, make the exhaust gas clean and odorless, and provide highly purified, clean, odorless, safe and reliable compressed breathing air for personnel.


五、 Product composition and characteristics

HC-W300 (3).jpg

This machine is equipped with an automatic shutdown device, which can set the shutdown pressure freely. It is equipped with a time running timer to hold the maintenance time;

Two cylinders can be filled at the same time; (It is recommended that one bottle be filled for faster inflation)

High power all copper core customized motor with stable power output and light starting load;

The protective cover adopts plastic spraying process, which is not easy to scratch and rust; (Some manufacturers use spray paint, which is low in cost and easy to fall off and rust)

Super strong V-belt, strong tension, wear resistance and high temperature resistance;

Shockproof pressure gauge 0~5800psi/400bar, with accurate pressure value;

The reinforced steel plate base is equipped with shockproof pads, making the equipment run more smoothly;

High strength nylon cooling fan, better heat dissipation effect;

Copper tube is used for low pressure, with better heat dissipation performance. Stainless steel tube is used for high pressure, ensuring the safety of output air pressure;

Rotating parts are equipped with protective covers, and safety valves and automatic shutdown systems are installed at all levels to ensure the safety of operators;

Motor driven or gasoline engine driven can be selected to meet the air supply demand under various conditions;

Equipped with precision air filter (customized screen filter element);

Level 2 oil-water separator (standard manual blowdown, optional automatic blowdown), final classification air purification system (standard manual blowdown, optional automatic blowdown), level 2 purification, water removal before odor removal; (Most manufacturers use Level 1 mixed filtration to save production costs)

The last stage adopts the piston ring process, and only the piston ring needs to be replaced for wear; (Most manufacturers do not use the last stage piston ring process, and need to replace a complete set of pistons and cylinders after wear, and pay for expensive accessories)

The end is equipped with a pressure maintaining valve for deep air filtration, which extends the service life of the filter element. The alloy aluminum permanent filter element is used, and the replaceable filter element material saves the later use cost; (Some manufacturers have no pressure maintenance valve and use disposable filter element to save production cost and increase later use cost)

The air cylinder, filter cartridge and other parts in contact with gas shall be cleaned with alcohol when leaving the factory, and food grade lubricating oil shall be used for test run, and the commissioning shall be completed before leaving the factory.


六、 Main applications

Fire breathing application: It is equipped in the gas supply station of each fire brigade or various fire fighting vehicles to conduct on-site emergency gas supply at the fire scene or in the process of rescue and relief, so that the majority of fire officers and fighters can breathe highly purified, clean, tasteless, safe and reliable compressed air in various environments such as thick smoke, toxic gas, steam or oxygen deficiency, thus ensuring that fire fighters can safely and effectively carry out fire fighting, rescue, relief and rescue.

Application of diving and breathing: diving clubs, diving enthusiasts, marine breeding, marine rescue, shipboard equipment, downhole operations, fishing, aquaculture, salvage of sunken objects, underwater engineering, water parks, shipbuilding and other industries provide highly purified, clean, tasteless, safe and reliable compressed breathing air for diving personnel. If the air can not be used for normal breathing, the air shall be filled into the high-pressure cylinder for human breathing.

hc-w400-10.jpg

hc-w400-10.jpg

七、   Product display





Copyright © 2021-2031 泸州浩诚机械设备有限公司 版权所有  备案号:蜀ICP备19031772号