全国服务热线
| 一、The product name |
| MCH6/EM/ET/SH Respirator pump (high pressure air compressor) |
| 二、Product pictures |
|
| 三、The main parameters |
l Model: MCH6/EM/ET/SH l Working pressure: 30Mpa mpa (300bar) l displacement (suction state) : 80~100L/min L/min l type: X type layout - four cylinder four - stage reciprocating piston compression l Drive: electric 220V/50Hz/2.2kw or 380V/50Hz/3kw or Honda gasoline engine drive l Lubrication mode: splash lubrication l Cooling mode: air cooling l Control mode: manual stop or (optional automatic stop to pressure) l Clean air: 1 air filtration, 1 oil-water separation, 1 air purification l Safety device: last stage installation valve, transmission part installation shield l Packing size (L × W × H) : 35×65×39cm l Weight: 39kg Filling speed: Fill a 6-liter bottle with 30Mpa for about 22 minutes l Related certification: CE certification, MA test report, breathing air test report l Packing list: instruction manual, safety test report certificate, 1 set of inflatable hose and connector, 1 bottle of standard lubricating oil. |
四、The working principle of |
Pure air after air filter (1) through (2) the level of intake valve into the cylinder, cylinder after level 1 cylinder compression, through (3) the level of exhaust valve into the cylinder (4) the level of cylinder cooler, after cooling gas into the secondary cylinder, compressed air through (5) to (6) the secondary cooler, after cooling gas into level 3 cylinder, After 3 cylinder compression through (7) into (8) level 3 cooler, after cooling gas into the level 4 cylinder, compressed air through the level 4 cylinder (9) to (10) level 4 cooler, compression and cooling gas into the oil and water condenser (11), after entering (15) activated carbon molecular sieve filter, filter the purity of the air through discharge hose (16). (12) pressure gauge (13) safety valve (14) connecting pipe |
| This product is batch produced according to the Italian model optimization, the last piston adopts special technology, the piston ring adopts the Japanese RIKEN technology, all the casting products are cast by foreign professional large factories, and the product has been on the market for more than ten years, and has been praised by users. This product uses four cylinder four stage compression, splash lubrication, final safety valve and filtration system. MCH6 can provide safe compressed air for any industry requiring high pressure pure air source, and provide safe compressed air to meet human breathing requirements. This product is designed, produced and tested in accordance with the requirements of GB/T 12929-2008 "Marine High Pressure Piston Air Compressor". Air quality in line with EN12021 international respiratory compressor respiration standard; MCH6 is a kind of air compression equipment. It compreses 1 kg (1bar/0.1Mpa) of free air to 300 kg (300bar/30Mpa) of high pressure gas step by step. After the air flows through the separator and filter in the unit, the oil and impurities contained in the high pressure air are removed. It can also filter the inhaled air containing fine particulate matter (PM2.5) below the safety value of 10 micrograms, in line with the standards formulated by the World Health Organization, so that the exhaust gas is clean and tasteless, providing high purification, clean and tasteless, safe and reliable compressed breathing air for personnel. |
五、 Product composition and characteristics |
Rotating parts with protective cover device, to ensure the safety of operators; High strength nylon cooling fan, better heat dissipation effect; Four-cylinder four-stage compression, low compression ratio, reliable performance; Motor driven or gasoline engine driven to meet the gas supply needs under various conditions; Splash type high efficiency lubrication; Air cleaner (paper element) Oil-water separator (standard manual sewage) Air purification system (standard manual sewage) Activated carbon, molecular sieve, carbon monoxide absorption molecules constitute a triple breathing air purification system, reusable packing cylinder, simple and convenient exchange, cost saving Manual stop function (optional automatic stop) Final safety valve, overpressure automatic discharge Shockproof pressure gauge 0 to 5800psi/400bar Compressor seat manufacturing fine, durable; Stainless steel cooling system; |
| 六、 The main application |
Fire breathing application: Equipped with fire brigade in the gas station or on various fire fighting vehicles, in the process of the scene of the fire and disaster relief, on-site emergency gas supply, make broad fire commanders in smoke, gas, steam or oxygen to all sorts of circumstances, such as breathing to high purification, tasteless, safe and reliable clean compressed air, to ensure that the fire fighting personnel can safely and effectively for the fire fighting, emergency rescue and disaster relief, rescue. Diving and breathing application: diving club, diving enthusiasts, Marine aquaculture, Marine rescue, ship equipment, underground work, fishing, aquaculture, sunken object salvage, underwater engineering, water park, shipbuilding and other industries, to provide divers with high purification, clean, tasteless, safe and reliable compressed breathing air. Fill the air into a high-pressure gas cylinder for human respiration when the air consumption cannot be satisfied. |
七、 Product display |
|
全国服务热线：15397675238
