HC-X100 positive pressure respirator filling pump

L Model: HC-X100/EM/ET/SH

L Working pressure: 30Mpa Mpa (300bar)

L Displacement (suction state): 100L/min L/min

L Type: X-type layout - four cylinder four stage compression to resurrection plug

L Drive: electric 220V/50Hz/2.2kw or 380V/50Hz/3kw or Honda gasoline engine

L Lubrication mode: splash lubrication

L Cooling mode: air cooling

L Control mode: manual shutdown or (automatic shutdown at pressure is optional)

L Clean air: once for air filtration, once for oil-water separation, once for air purification

L Safety device: last stage installation valve and transmission part are installed with protective cover

L Package size (length × wide × Height): 60 × thirty-six × 43cm

L Weight: 45kg

L Inflation speed: 30Mpa for about 22 minutes in a 6L bottle

L Relevant certification: CE certification, MA test report, air breathing test report

L Packing list: instruction manual, safety inspection report certificate, 1 set of inflation hose and connector, 1 bottle of standard lubricating oil.

四、working principle

This product is produced in batches after the design change and optimization of the Italian model. The final piston adopts special process, the piston ring adopts Japanese Riken process, and all the casting products are cast in a large-scale factory with outsourcing expertise. The product has been on the market for more than ten years and has received unanimous good comments from users. This product adopts four cylinder four stage compression, splash lubrication, last stage safety valve and filtering system. HC-X100 can provide safe compressed air for any industry that needs high pressure and pure air source, and can also provide safe compressed air that meets the requirements of human respiration. This product is designed, produced, commissioned and accepted according to the requirements of Marine High Pressure Piston Air Compressor (GB/T 12929-2008); The air quality conforms to EN12021 international breathing standard for breathing compressors; HC-X100 is an air compressor, which compresses 1kg (1bar/0.1Mpa) of air in free state to a high pressure gas with a gauge pressure of 300kg (300bar/30Mpa) step by step. After passing through the separator and filter in the unit, the air removes the oil and impurities contained in the high pressure air, and filters the fine particulate matter (PM2.5) contained in the inhaled air to a safety value of less than 10 micrograms, Comply with the standards formulated by the World Health Organization, make the exhaust gas clean and odorless, and provide highly purified, clean, odorless, safe and reliable compressed breathing air for personnel.

五、 Product composition and characteristics

Rotating parts are equipped with protective covers to ensure the safety of operators;

High strength nylon cooling fan, better heat dissipation effect;

Four cylinder four stage compression, low compression ratio, reliable performance;

Motor driven or gasoline engine driven to meet the air supply demand under various conditions;

Splash type high efficiency lubrication;

Air filter (paper filter element)

Oil water separator (standard manual blowdown)

The gas purification system (standard manual blowdown) consists of activated carbon, molecular sieve and carbon monoxide absorption molecule, which form a triple breathing air purification system. The reusable packing cartridge is simple and convenient to replace, saving costs

Manual shutdown function (automatic shutdown is optional)

Last stage safety valve, overpressure automatic relief

Shockproof pressure gauge 0 ～ 5800psi/400bar

The compressor base is finely manufactured and durable;

Stainless steel cooling system;

六、 Main applications

Fire breathing application: It is equipped in the gas supply station of each fire brigade or various fire fighting vehicles to conduct on-site emergency gas supply at the fire scene or in the process of rescue and relief, so that the majority of fire officers and fighters can breathe highly purified, clean, tasteless, safe and reliable compressed air in various environments such as thick smoke, toxic gas, steam or oxygen deficiency, thus ensuring that fire fighters can safely and effectively carry out fire fighting, rescue, relief and rescue.

Application of diving and breathing: diving clubs, diving enthusiasts, marine breeding, marine rescue, shipboard equipment, downhole operations, fishing, aquaculture, salvage of sunken objects, underwater engineering, water parks, shipbuilding and other industries provide highly purified, clean, tasteless, safe and reliable compressed breathing air for diving personnel. If the air can not be used for normal breathing, the air shall be filled into the high-pressure cylinder for human breathing.

七、   Product display