全国服务热线:15397675238

您的位置: 首页 > Fire air compressor

HC-W265 fire breathing apparatus inflator pump

HC-W265 fire breathing apparatus inflator pump is equipped in each fire brigade air supply station or a variety of fire vehicles, in the fire scene or in the process of rescue and relief, emergency air supply, so that the majority of fire fighters in smoke, gas, steam or hypoxia and other environments, breathe highly purified, clean, tasteless, safe and reliable compressed air. Thus to ensure that fire extinguishing personnel can safely and effectively carry out fire fighting, rescue, disaster relief, rescue.

在线咨询 全国热线
15397675238
产品介绍


一、 The product name

HC-W265 Respirator inflator Pump (high pressure air compressor)

二、Product pictures
w265-1.jpg
三、The main parameters

l Model: HC-W265


l Working pressure: 30Mpa mpa (300bar)


l displacement (suction state) : 265L/min L/min


l type: W type layout - three cylinder three stage reciprocating piston compression


l Drive: electric 380V/50Hz/5.5kw


l Lubrication mode: splash lubrication (food grade lubricating oil 750-H2)


l Cooling mode: air cooling


l Control mode: automatic shutdown


l Clean air: 1 time air filtration, 2 times oil-water separation, 2 levels of classified air purification


l Safety device: inter-stage safety valve, pressure maintenance valve, automatic shutdown system, transmission part of the installation of protective cover


l Packing size (L × W × H) : 125×70×92cm


l Weight: 160kg


Filling speed: Fill a 6-liter bottle with 30Mpa for about 8 minutes


l Related certification: CE certification, MA test report, air breathing test report


l Packing list: instruction manual, safety inspection report certificate, 2 sets of inflatable hose and connector, food grade lubrication is built in the machine.



四、The working principle of

hc-w400-9.jpg

This product is mass-produced after design modification and optimization of Italian models. The final piston adopts special technology, the piston ring adopts Japanese Riken technology, and all cast products are cast by foreign professional large factories. The products have been on the market for more than ten years, and have been well received by users. This product uses three cylinder three stage compression, splash lubrication, inter-stage safety valve and filtration system. HC-W265 can provide safe compressed air for any industry requiring high pressure pure air source, and provide safe compressed air to meet the requirements of human breathing. This product is designed, produced and tested in accordance with the requirements of GB/T 12929-2008 "Marine High Pressure Piston Air Compressor". Air quality in line with EN12021 international respiratory compressor respiration standard; HC-W265 is a kind of air compression equipment, it will free state of air 1 kg (1bar/0.1Mpa), through the stepwise compression of the gauge pressure of 300 kg (300bar/30Mpa) high pressure gas, the air flows through the separator and filter in the unit, remove the oil and impurities contained in the high pressure air, It can also filter the inhaled air containing fine particulate matter (PM2.5) below the safety value of 10 micrograms, in line with the standards formulated by the World Health Organization, so that the exhaust gas is clean and tasteless, providing high purification, clean and tasteless, safe and reliable compressed breathing air for personnel.

五、 Product composition and characteristics

w265-3.jpgw265-31.jpg


Product composition and features:


1, pressure control valve: safe and stable performance, automatic shutdown pressure can be adjusted;


2, pressure maintenance valve: extend the cycle of filter element, keep the filter quality in a good state;


3. Oil-water separator: primary and secondary oil separation, filtering impurities and moisture in the air;


4, the final filtration system: improve the air purity, to meet the EN12021 human breathing standard;


5, inter-level safety valve: to ensure the safety of the machine and operator;


6, running timer: regular maintenance is simple;


7, high power motor: load start easily, smooth rotation;


8, piston cylinder adopts exclusive material technology, wear resistance and high temperature resistance, long service life.


HC-W300 (3).jpg


The machine is equipped with automatic stop device, can set the stop pressure freely, equipped with time running timer, hold the maintenance time;


2 gas cylinders can be filled at the same time; (It is recommended to fill 1 bottle for faster inflation)


High-power custom-made motor with copper core wire, stable power output and light starting load;


The protective cover adopts plastic spraying process, which is not easy to scratch and rust; (Some manufacturers use spray paint, low cost and easy to fall off rust)


Super triangular belt, strong tension, wear resistance and high temperature;


Shockproof pressure gauge 0 ~ 5800psi/400bar, accurate pressure value;


The reinforced steel plate base is equipped with shockproof pad, which makes the equipment run more smoothly.


High strength nylon cooling fan, better heat dissipation effect;


Low pressure copper pipe, better heat dissipation performance, high pressure stainless steel pipe, to ensure the safety of the output air pressure;


Rotating parts with protective cover device, all levels are equipped with safety valve and automatic shutdown system to ensure the safety of operators;

Optional motor drive or gasoline engine drive, to meet the needs of gas supply under various conditions;

Equipped with precision air filter (customized screen filter);

2 stage oil-water separator (standard manual sewage, optional automatic sewage) final stage super large air purification system (standard manual sewage, optional automatic sewage);


The last stage uses the piston ring technology, wear only need to replace the piston ring; (Most manufacturers do not use the last piston ring process, wear need to replace a set of piston, cylinder, pay the cost of expensive accessories)


The end adopts pressure maintenance valve, deep air filtration, and prolong the life of the filter element, and the use of alloy aluminum permanent filter element, replaceable filter element material, save the later use cost; (Some manufacturers have no pressure to maintain the valve, and the use of disposable filter element, save production costs, increase later use costs)


Cylinder, filter cylinder and other parts in contact with the gas, when leaving the factory with alcohol cleaning, and use food grade lubricating oil test, factory debugging.


六、 The main application

Fire breathing application: Equipped with fire brigade in the gas station or on various fire fighting vehicles, in the process of the scene of the fire and disaster relief, on-site emergency gas supply, make broad fire commanders in smoke, gas, steam or oxygen to all sorts of circumstances, such as breathing to high purification, tasteless, safe and reliable clean compressed air, to ensure that the fire fighting personnel can safely and effectively for the fire fighting, emergency rescue and disaster relief, rescue.

Diving and breathing application: diving club, diving enthusiasts, Marine aquaculture, Marine rescue, ship equipment, underground work, fishing, aquaculture, sunken object salvage, underwater engineering, water park, shipbuilding and other industries, to provide divers with high purification, clean, tasteless, safe and reliable compressed breathing air. Fill the air into a high-pressure gas cylinder for human respiration when the air consumption cannot be satisfied.

七、   Product display





Copyright © 2021-2031 泸州浩诚机械设备有限公司 版权所有  备案号:蜀ICP备19031772号