全国服务热线:15397675238

您的位置: 首页 > 300 kg air compressor

HC-W0.6/300 high pressure air compressor for air tightness test

HC-W0.6/300 high pressure air compressor for air tightness testing is mainly used for valve testing, instrument testing, pipeline testing, cylinder testing, pressure vessel testing, etc. Meanwhile, it provides safe compressed air for equipment requiring high pressure air supply.

在线咨询 全国热线
15397675238
产品介绍


一、 Product name

HC-W0.6/300 high pressure air compressor for air tightness test

二、Product pictures
0.6-300-1.jpg
三、main parameter
  • Series: four stage compression to reviving plug type

  • Air displacement (suction state): 600L/min (0.6m3/min)

  • Discharge pressure: 300 Bar (30 MPa)

  • Drive: three-phase motor 15KW/380V/50HZ

  • Lubrication mode: splash type

  • Cooling mode: air cooling

  • Noise: < 100dBA

  • Overall dimensions (length × wide × Height): 150 × sixty × 103cm

  • Unit weight: 480kg

  • Electric control system: PLC control, automatic start stop, automatic blowdown, overload protection, phase sequence protection, phase loss protection, low oil protection, pressure monitoring and temperature monitoring.


四、working principle

0.6-300-4.jpg

This product is produced in batches after the design change and optimization of the German model. The last piston adopts the titanium nitride process, the piston ring adopts the Japanese Riken process, and all the casting products are cast in the large-scale factory of outsourcing profession. The product has been on the market for more than ten years, and has been unanimously praised by users. At the same time, our production process is superior to other domestic companies. This product adopts four cylinder four stage compression, splash lubrication, interstage safety valve and filtering system. HC-0.6/300 can provide safe compressed air for any industry requiring high-pressure air source. This product is designed, produced, commissioned and accepted according to the requirements of Marine High Pressure Piston Air Compressor (GB/T 12929-2008); This product is an air compressor, which compresses 1kg (1bar/0.1Mpa) of air in free state to a high pressure gas with a gauge pressure of 300kg (300bar/30Mpa) step by step. After passing through the separator and filter in the unit, this air removes the oil and impurities contained in the high pressure air, providing highly purified, clean, safe and reliable compressed air.

五、 Product composition and characteristics

Motor protection

The air compressor controller has overload protection function for the main motor. In case of motor stalling, overload and other faults during machine operation, the motor will stop running and give an alarm.

Inlet air over temperature protection

When the intake air filter is blocked, the cooler is blocked, and the intake and exhaust valves are damaged, resulting in the intake air temperature being higher than the upper limit of the set temperature, the controller will alarm and shut down.

Supply pressure overpressure protection

When the air supply pressure is higher than the set high pressure limit, the controller will alarm and shut down.

Oil shortage protection

When the crankcase is short of oil, the controller alarms and shuts down to prevent the machine from working without oil.

Timing function

The machine has a timed shutdown function, which is used for timed machine maintenance. The password can be set freely.


六、 Main applications

C30-8.jpg

HC-W0.6/300 high pressure air compressor for air tightness testing is mainly used for valve testing, instrument testing, pipeline testing, cylinder testing, pressure vessel testing, etc. Meanwhile, it provides safe compressed air for equipment requiring high pressure air supply.

七、   Product display





Copyright © 2021-2031 泸州浩诚机械设备有限公司 版权所有  备案号:蜀ICP备19031772号