全国服务热线:15397675238

您的位置: 首页 > Submersible air compressor

HC-W300 submersible respirator inflation pump

HC-W300 submersible respirator inflation pump (high-pressure air compressor)

在线咨询 全国热线
15397675238
产品介绍


一、 Product name

HC-W300 Breather Charging Pump (High Pressure Air Compressor)

二、Product pictures
hc-w400-3.jpg
三、main parameter

Model: HC-W300

Working pressure: 30Mpa Mpa (300bar)

Displacement (suction state): 300L/min L/min

Type: W-type layout - three cylinder three-stage reciprocating piston compression

Drive: electric 380V/50Hz/7.5kw or Honda gasoline engine

Lubrication method: splash lubrication (food grade lubricating oil 750-H2)

Cooling mode: air cooling

Control mode: automatic shutdown

Clean air: primary air filtration, secondary oil-water separation, secondary classified air purification

Safety device: intermediate safety valve, pressure maintaining valve, automatic shutdown system, and protective cover for transmission part

Package size (length × wide × Height): 125 × seventy × 92cm

Weight: 210kg

Inflation speed: 6L bottle, 30Mpa, about 7 minutes

Relevant certification: CE certification, MA test report, breathing air test report

Packing list: instructions, safety inspection report certificate, 2 sets of inflation hoses and connectors, and food grade lubrication inside the machine.

四、working principle

hc-w400-9.jpg

This product is produced in batches after design change and optimization according to the German model. The final piston adopts special process, the piston ring adopts Japanese Riken process, and all the casting products are cast in a large-scale factory with outsourcing expertise. The product has been on the market for more than ten years and has won unanimous praise from users. This product adopts three cylinder three-stage compression, splash lubrication, interstage safety valve and filtering system. HC-W400 can provide safe compressed air for any industry that needs high pressure and pure air source, and can also provide safe compressed air that meets the requirements of human respiration. This product is designed, produced, commissioned and accepted according to the requirements of Marine High Pressure Piston Air Compressor (GB/T 12929-2008); The air quality conforms to EN12021 international breathing standard for breathing compressors; HC-W400 is an air compressor, which compresses 1kg (1bar/0.1Mpa) of air in free state to a high pressure gas with a gauge pressure of 300kg (300bar/30Mpa) step by step. After passing through the separator and filter in the unit, the air removes the oil and impurities contained in the high pressure air, and filters the fine particulate matter (PM2.5) contained in the inhaled air to a safety value of less than 10 micrograms, Comply with the standards formulated by the World Health Organization, make the exhaust gas clean and odorless, and provide highly purified, clean, odorless, safe and reliable compressed breathing air for personnel.

五、 Product composition and characteristics

HC-W300 (2).jpg

Product composition and characteristics:

1. Pressure control valve: safe and stable performance, adjustable automatic shutdown pressure;

2. Pressure maintenance valve: prolong the service life of filter element and keep the filtering quality in good condition;

3. Oil water separator: primary and secondary oil separation to filter impurities and moisture in the air;

4. Two stage filtration system: improve air purity and reach EN12021 human respiratory standard;

5. Interstage safety valve: to ensure the safety of the machine and operators;

6. Running timer: regular maintenance is simple;

7. High power motor: easy to start with load, stable rotation;

8. The piston cylinder is made of exclusive materials, which is wear-resistant, heat-resistant and has a long service life.


HC-W300 (1).jpgHC-W300 (3).jpg

This machine is equipped with an automatic shutdown device, which can set the shutdown pressure freely. It is equipped with a time running timer to hold the maintenance time;

Two cylinders can be filled at the same time; (It is recommended that one bottle be filled for faster inflation)

High power all copper core customized motor with stable power output and light starting load;

The protective cover adopts plastic spraying process, which is not easy to scratch and rust; (Some manufacturers use spray paint, which is low in cost and easy to fall off and rust)

Super strong V-belt, strong tension, wear resistance and high temperature resistance;

Shockproof pressure gauge 0~5800psi/400bar, with accurate pressure value;

The reinforced steel plate base is equipped with shockproof pads, making the equipment run more smoothly;

High strength nylon cooling fan, better heat dissipation effect;

Copper tube is used for low pressure, with better heat dissipation performance. Stainless steel tube is used for high pressure, ensuring the safety of output air pressure;

Rotating parts are equipped with protective covers, and safety valves and automatic shutdown systems are installed at all levels to ensure the safety of operators;

Motor driven or gasoline engine driven can be selected to meet the air supply demand under various conditions;

Equipped with precision air filter (customized screen filter element);

Level 2 oil-water separator (standard manual blowdown, optional automatic blowdown), final classification air purification system (standard manual blowdown, optional automatic blowdown), level 2 purification, water removal before odor removal; (Most manufacturers use Level 1 mixed filtration to save production costs)

The last stage adopts the piston ring process, and only the piston ring needs to be replaced for wear; (Most manufacturers do not use the last stage piston ring process, and need to replace a complete set of pistons and cylinders after wear, and pay for expensive accessories)

The end is equipped with a pressure maintaining valve for deep air filtration, which extends the service life of the filter element. The alloy aluminum permanent filter element is used, and the replaceable filter element material saves the later use cost; (Some manufacturers have no pressure maintenance valve and use disposable filter element to save production cost and increase later use cost)

The air cylinder, filter cartridge and other parts in contact with gas shall be cleaned with alcohol when leaving the factory, and food grade lubricating oil shall be used for test run, and the commissioning shall be completed before leaving the factory.


六、 Main applications

Fire breathing application: It is equipped in the gas supply station of each fire brigade or various fire fighting vehicles to conduct on-site emergency gas supply at the fire scene or in the process of rescue and relief, so that the majority of fire officers and fighters can breathe highly purified, clean, tasteless, safe and reliable compressed air in various environments such as thick smoke, toxic gas, steam or oxygen deficiency, thus ensuring that fire fighters can safely and effectively carry out fire fighting, rescue, relief and rescue.

Application of diving and breathing: diving clubs, diving enthusiasts, marine breeding, marine rescue, shipboard equipment, downhole operations, fishing, aquaculture, salvage of sunken objects, underwater engineering, water parks, shipbuilding and other industries provide highly purified, clean, tasteless, safe and reliable compressed breathing air for diving personnel. If the air can not be used for normal breathing, the air shall be filled into the high-pressure cylinder for human breathing.

hc-w400-10.jpg

七、   Product display





Copyright © 2021-2031 泸州浩诚机械设备有限公司 版权所有  备案号:蜀ICP备19031772号