一、 Product name |
W-1.5/30 mobile medium and high pressure air compressor |
二、Product pictures |
三、main parameter |
Model: W-1.5/30 air compressor Working pressure: 3Mpa MPa Air displacement: 1.5M3/min m3/min Drive: 380V Motor power: 18.5KW Rotating speed: 650rpm min/rev Cooling mode: air cooling Air receiver: 300L Overall dimension: 162 × sixty-six × 130cm Weight: 630kg kg This product adopts the reciprocating working principle of piston, multi-level compression, belt transmission, splash oil lubrication, the core components of the product are made of imported materials, some parts are made by casting and high-precision machining centers, and the supporting parts are produced by good domestic enterprises. Self made parts and unqualified purchased parts are not allowed to enter the warehouse, and the material, processing equipment, manufacturing process, assembly and testing of the parts are strictly controlled at all levels, Ensure that each product is reliable in quality and qualified for delivery. |
四、Product features |
● It has good reliability and can operate continuously for 24 hours. ● W-shaped or V-shaped structure, multi-stage compression, air cooling to resurrection plug type. ● The crankshaft is a single cantilever supporting structure, with dismountable maintainability. The main bearing adopts precision roller bearing; The connecting rod reducer is a special needle bearing; With strong load capacity, the whole machine has no bearing bush, low friction power consumption and strong resistance to harsh working conditions. ● The original design criteria and manufacturing process of inertia moment balance have low vibration alignment of the whole machine. ● The suction part adopts special technology: impedance composite suction muffler and lower intake arrangement. Low suction temperature and low noise. ● Low pressure level adopts "domestic brand DC valve", which increases gas production by 13% and reduces energy consumption by 11%. ● The first and second pressure stages adopt stainless steel combined ring valve and direct flow valve technology, and the valve sheet materials are made of imported stainless steel strips. ● Fully automatic flow regulation, automatic drainage and discharge of interstage residual gas during unloading, to ensure no load (optional) for each startup. ● To ensure the high safety and reliability of the air compressor, the redundancy design principle is adopted and multiple protection measures are set: automatic protection for motor overload, overheating, phase loss and undervoltage; Discharge water and air during unloading and shutdown to ensure zero pressure startup; Set the pressure sensor to detect the zero pressure and ensure that the zero pressure starts. ● The large displacement model adopts a timing drain valve, and each drain time and drain interval can be adjusted. Ensure regular drainage between stages when the air compressor runs continuously for a long time to effectively prevent excessive water accumulation and liquid hammer accidents. ● Large diameter automatic drain valve, no hidden danger of blockage or breakdown. ● The advanced inductive contactless low oil level electronic alarm (or forced shutdown) device is used for large displacement models, which has stable and reliable performance and ensures that the equipment is free from oil shortage and burning failure. ● The piston ring is made of imported titanium alloy, and its service life is extended by 3-4 times. ● Modular design is adopted for large displacement models, which is convenient to form a multi machine linkage system, double the gas production and facilitate users' selection. |
五、Product application |
|
六、Product pictures |